Last Updated on March 8, 2022 by Marco C.
An aquarium corner overflow kit is used to control water flow.
Aquarium overflow is one of those things that helps maintain the health of your underwater world. Therefore, it is very important to pay attention to choosing the one that will suit best for your aquatic pets, and your system.
This time we will talk about the aquarium corner overflow kit. Therefore, keep reading and find out what it takes to make your underwater world thrive.
What Is Aquarium Overflow?
Aquarium overflows can be freely considered as state-of-the-art. What does it do? – Exactly what the name says, allows water to overflow out of the tank.
Furthermore, an aquarium corner overflow kit among many other things directs water from the tank into the opening to place your aquarium equipment out of sight. In addition, it adds extra total water volume through a sump which promotes stability, and also maintains a constant water level in your fish tank.
Read more about: How To Set Up An Aquarium Sump
The Main Types Of Aquarium Overflow
There are two main types of aquarium overflow, and these are external overflow and internal overflow. Read more about each below.
Internal Aquarium Overflow
Unlike the previous one that didn’t, internal overflow requires drilling an aquarium tank or buying a pre-drilled aquarium. This option is a much more reliable overflow solution and also offers a cleaner-looking setup.
External Aquarium Overflow
When using external overflow, the water rises over the rim of your fish tank and then drains down a pipe to the sump. As for this type of overflow, it is slightly less ideal than the internal one. Namely, they break down much easier and more often, and when that happens, they can easily lead to tank water overflowing your aquarium and onto the floor.
Learn more about: Wet/dry Filter for Freshwater Aquarium
Aquarium Overflow & Noise
As for the noise the system generates, it depends on the type of overflow you choose. External overflows are generally quieter than internal ones. This is primarily because the external ones have a siphon needed to flow water over the edge of the aquarium, while unlike them, the internal ones have a standard open pipe that gurgles, which results in noise.
What Is An Aquarium Corner Overflow Kit?
The aquarium corner overflow kit is designed to maximize circulation and remove dead zones within the fish tank. These types of corner kits are designed to maximize the flow of water into the main filter system, by drowning water from the upper and lower levels of the aquarium. In addition, they are a great way to hide and protect your aquarium equipment.
Depending on the manufacturer, the aquarium corner overflow kit usually includes a pre-drilled aquarium, factory-installed back-corner that are siliconed into the aquarium as well as plumbing kit. Furthermore, a plumbing kit usually consists of bulkhead fittings, drain, return pipes, and dual flexible nozzles.
In terms of appearance, you can usually find triangular and rectangular ones. They are usually placed in the corner of the aquarium, most often in the back, but that part is definitely optional. Also, as far as the installation process itself is concerned, it is quite simple with most aquarium corner overflow kits. Namely, one edge of the box is attached to the back of the tank, while the other is attached to the sidewall.
Finally, when buying, pay attention to which side of the tank you will place it on. There are different types of aquarium corner overflow kits that are designed to be placed on the right or left side of the aquarium tank.
In Conclusion
The aquarium corner overflow kit is a great thing! It allows you to hide all those ugly pieces of equipment, making them almost imperceptible in your display tank. In addition, the aquarium overflow allows you to use bigger and better equipment, and in addition, it also ensures a stable water level in the display tank.
Have you ever used an aquarium corner overflow kit & what are your experiences whit it? – Let us know in the section below!
Read more about Aquarium Salt Vs Table Salt – The Best Guide
FAQs
How Do You Make An Overflow For An Aquarium?
Use a sheet of 1/8 "thick black acrylic that you will cut with a jigsaw. Try to protect the acrylic with a protective film.
Once you cut it out, it is time to drill holes. Depending on the size of the sheet metal, drill a hole on average every 1 inch. After drilling, remove the protective film from the acrylic.
Then clamp the larger side down and heat the acrylic sheet with a heat gun. The acrylic will start to bend, and then when the smaller section starts straight down, remove the clamps and hold it in place at a 90-degree angle until it cools.
Then simply place the box inside the container in the place of your choice and glue it. After that, run a healthy ball of sealant along the sides and bottom, and then set the overflow box in place.
Allow it to dry for 72 hours. Then, pour in the water and check for leaks. If you don’t notice any leaks, congratulations, you have made your own aquarium overflow!
What Is A Ghost Overflow?
For example, the internal aquarium overflow has a standard open pipe that gurgles, and the external has a siphon needed to flow water over the edge of the aquarium. Accordingly, the internal aquarium overflow is much louder than the external one.
In this case, ghost overflow means the unattainable, dead silence of the device.
What Are Overflows For Aquariums?
Aquarium overflows have a unique role, and that is to allow water to travel from the display tank towards down to a sump or other filtration devices. It sets the water level in the display tank, as well as any water that comes over the edge of the overflow box. The moment it reaches the edge it will fall into the filtration system.
In terms of appearance and style, there are several models available. You can choose between those that are installed externally or internally, or that are placed in the middle or in the corner of the aquarium wall.
How Do I Stop My Aquarium Overflowing?
This problem most often occurs as a result of a power outage. Here are some basic tips to help prevent aquarium overflow:
If you have drilled a hole in the nozzle, it is recommended that you perform periodic inspections to make sure that the hole is not clogged with debris.
If the drilled hole is clogged, simply use a toothpick and remove any dirt to avoid overflow.
Consider installing a top-off system. This will definitely help you avoid overfilling your aquarium system when topping off.
